In
the image on the left you can see
that factory banjo bolt next the the
larger DieselManor Tapped Banjo.
The DMI banjo has larger holes to
allow for better fuel flow as well
as a 1/8"NPT port on the top for
fuel pressure gauges.
In the image on the right we have
connected a DiPricol electric Fuel
Pressure Gauge Sender in the new
banjo bolt. Notice 2 new Cummins
washer seals. One gets inserted on
the banjo bolt and the other goes
between the factory banjo fitting
and the fuel filter housing.
If you are not using an electric
Fuel Pressure gauge you will still
be getting your fuel pressure source
from the same location.
