|
This
cooler line manifold simply installs in the transmission cooler feed line.
It is fitted with a 1/8"NPT sender
port and is ready to accept a transmission temperature gauge
sender. This is the best
method for monitoring your transmission fluid temperature.
As ATF passes
by the hard working parts of the transmission, it is then
directed to the cooler by passing through this line. After
the fluid flows through the cooler, it is then directed back
to the pan by way of a return line. The cooled fluid
is then dumped into the transmission pan. Monitoring
the temperature in the feed line will give the operator an
earlier indication of hot temperatures compared to
monitoring the temperature in the pan alone.
|
FEATURES: |
-
Does not
obstruct ATF flow
-
Allows
for flow of ATF around sender probe, not just tip
-
Advanced indication of excessively hot ATF temperature
-
Installs in minutes
-
Leak Proof Swage-Loc
Fitting professionally installed
-
Quick and Easy
Installation
-
Accepts all senders (1/8"NPT)
-
Comes with installation
instructions
Installation Instructions
|
Cooler Line Manifold for 3/8" tube with 1/8"NPT port
(recommended for most Ford Powerstroke Automatics)
Part #: FTG-MFD375
Price $33.85 |
|
|
|
|
Cooler Line Manifold for 1/2" tube with 1/8"NPT port
(recommended for most Dodge Cummins Automatics)
Part #: FTG-MFD50
Price $43.65 |
|
|
|
|
Cooler Line Manifold for 5/8" tube with 1/8"NPT port
(recommended for most Duramax Allison Automatics)
Part #: FTG-MFD625
Price $52.69 |
|
|
|
|
