|
KEY FEATURES:
FIRST PROGRAMMER TO READ AND DISPLAY EGTs, probe included
Provides in-cab display to monitor vital engine functions
Additional 100 HP and 210 ft. lbs of torque
Four power levels with special mileage tune for improved fuel
economy
Displays DPF regeneration status
Ships with a custom designed pod
Internet updateable (cable included)
Displays and clear diagnostic trouble codes with full text
description
Adjustable LED backlight color
Displays Alerts and Records such as RPM, MPH and EGT
Datalogs vital engine information
Display Soot Mass
Simple installation
Scrolling parameters
ADVANCED TUNING:
Corrects for non-stock tire sizes to display true speed
Adjusts speed and rev limiters (Automatically adjusted in
power levels)
PERFORMANCE TESTING:
0-60 and Quarter mile performance tests with the drag strip
Christmas tree lighting and reaction times
DATA STREAM:
Records 5 parameters for up to 60 seconds
POWER LEVELS:
Level 0: Stock
Level 1: 30 Horsepower 57 Foot Pounds of Torque
Level 2: 50 Horsepower 90 Foot Pounds of Torque
Level 3: 75 Horsepower 150 Foot Pounds of Torque
Level 4: 85 Horsepower 200 Foot Pounds of Torque
Hot Unlock Levels below*
Level 5: 100 Horsepower 215 Foot Pounds of Torque
Level 6: 115 Horsepower 230 Foot Pounds of Torque
Level 7: 130 Horsepower 250 Foot Pounds of Torque
The Evolution programmer has the ability to remove/adjust your
vehicles factory speed limiter. Improper use of this feature
could result in a serious or fatal accident. Removal/adjustment
of the factory speed limiter is intended for use in a closed
circuit, legally sanctioned racing environment. Even if racing
in a legally sanctioned racing environment, it is your
responsibility to ensure your tires and other vehicle components
are rated to travel at increased speeds with the speed limiter
removed/adjusted. If you remove/adjust the speed limiter during
highway driving, it is your responsibility to obey all driving
laws, including adhering to posted speed limits.
Warranty: Edge products are warranted to be free from defects in
material and workmanship for 1 year from the date of purchase.
Note: These products will not work on GM 4500/5500 or larger
series trucks, it will only work on the 2500HD and the 3500
models.
CARB certification pending. CARB E.O testing currently in
progress. Currently not legal for use in the state of
California. Buyer responsible for adhering all local, state, and
federal laws.
|
