DIESEL AID + CETANE is formulated for high performance diesel
engines. DIESEL AID + CETANE combines the benefits of DIESEL AID
with a cetane improver.
DIESEL AID + CETANE increases cetane number. Cetane number is
the most universally accepted measure of diesel fuel ignition
quality. Proper ignition during the combustion cycle is
essential for optimum operation, economics, and durability.
Increasing the cetane number of diesel fuel provides for easier
starting, faster warm-ups, and less white smoke.
DIESEL AID + CETANE totally disperses water. All diesel fuel
contains water and this is the most common contaminant in diesel
fuel. Water causes fuel line freeze-ups and premature failure of
wear-related parts including fuel pumps and injectors. Water
also leads to the formation of slime, sludge, and rust.
Diesel fuel lubricity is a major concern because of Ultra Low
Sulfur Diesel (ULSD). ULSD contains significantly less lubricity
than Low Sulfur Diesel (LSD). As a result, metal components in
the engine fuel system are susceptible to failure. DIESEL AID +
CETANE will increase fuel system lubricity. Increased lubricity
protects against premature failure of engine fuel system
components including fuel pumps and injectors by forming a
protective layer on metal surfaces.
DIESEL AID + CETANE improves the cold temperature operability
limit of diesel fuel by modifying the size and shape of wax
crystals that form as the fuel is cooled below its cloud point.
The cloud point is the temperature at which wax crystals in
diesel fuel begin to form and the fuel goes from a clear
appearance to a cloudy appearance.
DIESEL AID + CETANE will reduce the pour point and Cold Filter
Plug Point (CFPP) of diesel fuel. The pour point is the
temperature which a diesel fuel will no longer flow. The CFPP is
a test for evaluating a fuels ability to run in the cold. A
lower CFPP provides better low temperature operability.
DIESEL AID + CETANE contains a detergent additive that will
increase engine power and fuel economy (miles per gallon) by
improving fuel combustion. Over time, fuel injectors build
carbon deposits, gums, and varnishes that plug the critical
close tolerances of the fuel system retarding fuel combustion.
Engine power and fuel economy can suffer from even extremely
small deposits. DIESEL AID + CETANE will clean fuel injectors
maximizing fuel economy and combustion by removing these
deposits and providing for a uniform spray pattern.
DIESEL AID + CETANE will reduce particulate emissions and black
smoke by improving fuel combustion. Particulate emissions and
black smoke result from improper combustion of diesel fuel.
• Ultra Low Sulfur Diesel (ULSD) Compliant
◦ Contains less than 15 ppm sulfur
• Increases Cetane Number 7 Points
◦ Increases cetane number by up to 7 points
◦ Improves cold starts and reduces warm-up time
◦ Reduces exhaust emissions
◦ Reduces misfire and white smoke
• Totally Disperses Water
◦ Eliminates fuel line freeze-ups
◦ Eliminates premature failure of fuel pumps and injectors
◦ Eliminates slime, sludge, rust and corrosion
• Increases Fuel System Lubricity
◦ Keeps fuel system lubricated
◦ Prevents premature failure of fuel pumps and injectors
• Contains 10% Anti-Gel
◦ Controls waxing and gelling
• Protection to 15 F (-9° C)
◦ Inhibits wax crystal growth
◦ Reduces pour point
◦ Reduces Cold Filter Plug Point (CFPP)
◦ Keeps fuel lines liquid
◦ Keeps fuel filters free of wax
• Detergent Action
◦ Keeps fuel system clean
◦ Extends pump and injector life
◦ Minimizes smoke
• Increases Power/Miles Per Gallon
◦ Maximizes fuel combustion
◦ Maximizes horsepower
For Regular Preventative Maintenance -
Use 1 ounce to every 15 gallons of diesel fuel. Pour directly
into tank before refueling. One 16 ounce bottle treats 240
For High Performance -
Use 2 ounces to every 15 gallons of diesel fuel. Pour directly
into tank before refueling.
OTHER ORDERING OPTIONS
Please call to order quantities not available on our
online shopping cart.