|
We have put together complete two
and three gauge kits for Ford Powerstroke owners.
This is an alternative to buying individual Gauges, gauge mount, and all of the hardware and sub-components yourself.
Most suppliers require you to purchase all of the optional
accessories separately, if they offer them at all. We at
DieselManor believe that you shouldn't have to find out in the
middle of your install that you don't have everything that you
need, causing unwanted trips to the hardware store or an
additional phone call to the distributor. Therefore we have put
together complete kits for most popular applications.
Note: All gauge pods come in black ABS plastic.
ISSPRO Black Dial, Black Bezel, Red Pointer gauges match
1999-2004 Superduty OEM instrument cluster (and some later
models). Pyrometer is
color-coded for Pre-Turbo applications. ISSPRO White
Dial, Black Bezel, Red Pointer gauges match most new 2005-2008 Superduties.
2007 and 2008 owners, if you'd like chrome bezels please see our
ISSPRO Accessories page for fold on bezels. Note: not
recommended for use in windshield gauge mounts.
|
Available
Mounting Styles |
Full A-Pillar |
Overhead Windshield Mount |
Under Dash (Cubby)
Mount |
| |
3-Gauge Kit - Pyro, Boost,
Trans: PRICE $327.95
2-Gauge Kit - Pyro, Boost: PRICE
$249.95
2-Gauge Kit - Pyro, Trans: PRICE $274.95
|
|
|
|
|
|
|
Thermocouple Options |
|
|
Part #:
R658SHT-8F (Ring
Terminals) - The standard thermocouple with all kits is the R658SHT-8F. Both
the leadwire and thermocouple have ring terminals. To make
the connection you need to overlap one ring of the
thermocouple over the matching ring terminal of the
leadwire. Then you insert a screw through both ring
terminals and tighten a nut on the back side. This is
done for both leads (red and yellow) of the thermocouple. This thermocouple has an adjustable Hi-Temp Inconel tip,
rated to 2000°F.
Adjusts to 1-5/8" and is supplied
with a 1/8"NPT slip nut. It requires you to drill and
tap the exhaust manifold (tap and bit sold below if needed).
|
|
|
Part #: R658SHT-8F-PL
(Weather Pack Connector)
This upgradeable thermocouple is the same as above except it
has a DELPHI Weather Pack connector. It simply plugs into
the matching weather pack leadwire. This connector speeds
up installation time, is fully
weatherproof, and is unaffected by, dirt, chemicals, or
vibration. Identical to
the factory connectors under your hood already, Weather Pack
connectors are used my most OEMs. If you choose
this option you will get a matching Weather Pack leadwire. |
| |
Description
Gauge Sets include: |
- Full A-Pillar, Overhead
Windshield, or Under Cubby mount in
3-gauge configuration.
-
Enhanced Visibility Pyrometer
-
Your choice of genuine ISSPRO Inconel Thermocouple: Ring Terminal style or
Weather Pack Connector.
- Thermocouple Lead Wire (6
feet) - NOTE: this will be long enough for overhead windshield
mount due to length of wires coming off gauge connector.
- All Overhead Windshield
mounted gauges come with ISSPRO R7799 extension cables if
applicable.
-
Enhanced Visibility Boost gauge in either 30, 40, or 60Lb., with 10 foot
tubing kit and DieselManor T-fitting kit for MAP line (for
7.3L), or Male 90°
Compression Tube Fitting for intake elbow (6.0L).
(Overhead windshield mounts will get DMI 14 foot tubing
kit and a 90° elbow fitting for the back of the boost gauge).
-
Enhanced Visibility Trans Temp gauge 100-280°F
with matched sending unit (if ordering 3-gauge set).
- All gauges dim equally
with your factory instrument cluster. Gauges connect to your
factory dimmer wire.
|
All of DieselManor's complete gauge kits come complete
with everything you need for installation on your Powerstroke.
Typical installation time is 2 to 3 hrs.
Here's What Else You Get:
A complementary assembly kit which includes: Detailed
Installation Instructions, T-Fitting kit to tie the boost line into the
Map sensor line instead of drilling and tapping the intake
Manifold (for 7.3L models), wiring harness for gauge backlighting, all
necessary hook-up wire, crimps, connectors,
snap grommets, fuse tap with fuse, and wire ties.
Click to enlarge
(this link will open up a new
window)
| Why
should you buy your gauge kit from DieselManor?
|
- We provide an ISSPRO Hi-Temp Inconel Thermocouple,
(rated to 2000°F) screw-in, or clamp style - your
choice. Other diesel stores may only provide you with a
standard (less expensive) thermocouple.
- You'll get everything
you need to do the install, including T-Tap connectors and
wire crimps.
- You'll receive
our our vehicle specific installation instructions in
addition to the ISSPRO instructions. Our
instructions are not generic in nature. One
version covers 1999-2003 7.3L models, and the other
covers 2003-2007 6.0L models. We will make sure you
receive the correct one. They include plenty of
color photos as well as a wiring schematic.
- We've performed
countless gauge installations - we know what works. You
can rest assured knowing that we've put our expertise to
work, ensuring that you will get everything specific to
your application. Your satisfaction is what we strive for,
nothing less.
- We have an after hours
tech support line in the event that you require
installation assistance during non-business hours.
- We fully stand behind
the ISSPRO brand. In the unlikely event that you
have a malfunctioning part, we will make all of the
arrangements to have that item exchanged/replaced, either
from our inventory or direct from Isspro. Isspro's
warranty for all analog gauges is 1 years from the
purchase date.
- Shop around. Ask
our competition if they can do all of the above.
Demand nothing less.
|
|
|
Hi - I recently
ordered a 3 Gauge set with A pillar for my 7.3L
PSD. Everything came as promised and I started
the install today. I must say it went amazingly
smooth. Every part (and then some) was there -
and the instructions were AWESOME. I do a lot of
tinkering and your instructions are hands down
the best I have seen for any "kit" I have ever
purchased. I will go out of my way to recommend
your company and product simply for this reason.
Please keep up the good work, and say thanks to
all the people involved with making this a
successful product.
Mike W.
Rio, WI 6/29/05
Read More Customer Letters |
|
|
DieselManor is a full stocking warehouse distributor for ISSPRO. If there is any ISSPRO product that you are looking for and can't find it in our website, just give us a call. OEM and Distributor inquiries are always welcome.
|
|
