|
|
 |
|
|
|
|
|
PML Transmission Pan |
|
|
PML 9323 Ford
Transmission Pan |
PML
Transmission Pan for E4OD/4R100 Ford Transmission
Part #:
PML-9323 $235.00 |
|
|
|
|
|
|
|
Application: |
Ford E4OD and 4R100 Transmissions
● 1989-2004 Ford 2WD
and 4WD with the E4OD or 4R100 transmission.
●
All 7.3L
Powerstroke Diesels up to 2003.
●
F250, F350, F450, F550 and F150 Lightning trucks
●
Some full size Broncos
●
Excursion*
●
E250 (5.4 V8), E350, E450 vans and motorhomes
●
Lincoln Navigator |
|
Capacity: |
3-1/2 Quarts (2WD) or 3 Quarts (4WD) more than stock pan. |
|
Overall Height: |
5.49"
|
|
The PML transmission pans are a
nice alternative for those who are looking for the added
benefits of increased cooling and a magnetic drain plug, but at
a lower cost than other brands. Cast in unfinished aluminum, and
the additional cooling fins, PML transmission pans provide
exceptional cooling over stock pans. All pans have a flat boss
that can be drilled and tapped for the use of a transmission
gauge sender. For taps and drill bits please see below.
|
Description and Components
• Increased oil capacity for
cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to the
transmission case
• 3/8-inch thick gasket flange will not bend when bolts are
tightened
• Machined gasket surface for a secure seal
• Boss cast into pan can be machined for a temperature
sensor
• Magnetic drain plug for easier, less messy maintenance
• Mounting hardware provided
• Gasket and filter not included (use stock parts).
* NOTE Excursion owners: This pan will clear the
frame cross member. If you have a 4WD, you may need to
loosen the rear trans mount bolts and jack up the transfer
case slightly to ease access to the bolts along the back of
the pan
|
|
|
|
|
 |
| |
